Discharge Reasons Grid

Add Discharge Reason

Click to add a Discharge Reason to this grid. Refer to instructions below in this topic.

Code

The Discharge Reason identification code.

Description

The user-defined description of the Discharge Reason.

Active

Check the box to make the Discharge Reason active so it will appear in lists and on reports. Uncheck the box to inactivate the Discharge Reason.

Delete

Click the button to delete a Discharge Reason.

Save

Click the button to save changes.

Reset

Click the button and unsaved changes are discarded.

Follow these steps to add a new Physical Unit to eSite.

From the eSite menu, select Setup—Global—Discharge Reasons.
From the Discharge Reasons grid, click Add Discharge Reason.
In the Code field, type the identifier for the Discharge Reasons and then press the Tab key.
In the Description field, type a description for the Discharge Reasons and then press the Tab key.
Select the Active check box if you want the discharge reason to be used in lists and on reports in the system.
Click Save. You are returned to the grid.

Note

Refer to Setup Steps and Setup Sequence in the Policies and Setup Guide for more information about initial setup of global policies.

Follow these steps to edit a Physical Unit in eSite.

From the eSite menu, select Setup—Global—Discharge Reasons.
Locate the Discharge Reason you want to change and then click in the field that you want to edit and make changes.
Click Save. You are returned to the grid.

Follow these steps to delete a Discharge Reason in eSite.

Note

You cannot delete a Discharge Reason that is in use by the system.

From the eSite menu, select Setup—Global—Discharge Reason
Locate the Physical Unit you want to delete and then click the Delete button. This removes the line from the grid but it is not permanently removed yet.
Select a button:
* Click Save to permanently delete the line from the grid.
* Click Reset to re-display the line; it is not deleted.

After Save or Reset, you are returned to the grid.